6 ideas, how can I save electricity - Life Haki

How can I save electricity

How can I save electricity: simple recommendations that always do
Every month they pay utility bills, each of us comes to mind how to save electricity.

After all, such an article costs is one of the most basic in the calculation of the average family.Tariffs of housing and utility services grow from year to year, so this issue is quite relevant.

Proper use of lighting products

Where to start saving?Experts recommend replacing standard dimmer switches.Such devices allow you to adjust the level of light.

After all, few people need a constant source of bright light in the kitchen, in the bedroom, toilet or bathroom.As a rule, there is fairly low power.

This is especially true of situations when you just enter a room for a minute, see a movie or play computer games.

You can proceed with savings by simply replacing ordinary light bulbs with LED.They contribute to much less energy consumption.

As for energy lamps, despite the fact that they also contribute to reducing electricity costs, not all experts recommend.

The fact is that in their production producers use Mercury.

In addition, such lamps give unnatural light, which do not affect the vision in the best way and significantly reduce its sharpness.In addition, their working life is not as reliable as LED.

Despite the fact that the latter is quite high, it will quickly pay off.Using them, you can save on your payment.

For example, one 4 W lamp will be 16 times more economical than a standard light bulb or 75 watts.And the world will give the exact same amount.

Therefore, it is better to spend money on the ice lamp once than pay several times more.

In addition, according to their production companies, their validity period is approximately 30 thousand hours.On average work process, 4 hours a day, such lighting is more than ten years old!

In addition, they are safer than ordinary fire, because they are almost not heated.Consider their acquisition as long investment and investment in TERT and they will pay off with more than.

Electricity saving

You can save electricity by increasing the number of light sources around the entire perimeter of the living space.

In this case, it will easily regulate the lighting that is necessary.For example, it is not necessary to include light in the entire bedroom or kitchen if you need to light a table.

Just turn on the wall scons or desktop light.

How to properly use the technique?

The correct selection of equipment and electrical devices will help significantly minimize light costs:

  1. Remember that in stores should choose the technique with "a" with the energy consumption class.This letter means that iron, refrigerator, microwave, etc.They consume a small amount of electricity.Also, the "B" class is not inferior to it.The big mistake will be the acquisition of the device with the "G" class, because it is the most energy -konsuming.
  2. The size of the equipment should be selected depending on how many family members live in the apartment.For example, if the family consists of two people, do not buy a veil machine with 5 kg of loading.In addition, in this case you will have to spend additional kilowatts of electricity, starting a semi-empty unit.This also applies to the purchase of a powerful refrigerator that is not needed in a family of two people.

Turn off electrical equipment completely if you do not use them for some period.Remember that the fork from the socket should always be turned off after the device!This is due to the fact that the home equipment consumes electricity even in standby mode.Spend the same manipulating charger for phones, laptops and other devices.

Proper use of refrigerators to resolve unnecessary costs

When choosing a refrigerator in the store, give a preference for what no frost function.The technique with a similar mark will significantly reduce electricity consumption.

It is best to put a refrigerator on the coldest place in the kitchen.Installing such an element of equipment near the oven will be wrong.It is recommended to put it on the outside of the room.

It's the one that is always bigger than others.This will allow the refrigerator to do not overheat.

As for the freezer, it is best to keep it with filled products.This supports the flow temperature of the electrical engineering is normal.

In addition, make sure that the freezer and refrigerator doors are always indoors.

There is no need to list hot drinks, soups and other fluids on the radiator shelves.Let food on plates, pots or in a pan cooling.It is free and you do not need to spend power and accordingly pay extra for further kilowatts.It should be borne in mind that milk, juices, soups and other liquids should always be closed.Otherwise, the moisture will evaporate, which will cause energy consumption.

The kitchen panel will help save

When buying an apartment, buy the one equipped with a gas stove.Food preparation on it is much more profitable than in the one that works for electricity.

You can also reduce the payment by receiving the use of induction stove.

It has the lowest energy consumption because this households warms only the bottom of the pan, the shelter or pots.And in ordinary tiles, the burner is warming up.

In addition, remember that the diameter of meals to prepare various dishes should be a little more than burners or match it.

This will allow you to achieve better heat transfer due to closer states on the burner.Cooking with a closed cover will help not revolve electricity.

This method will warm food in the dishes, not air in the kitchen.

Always turn off the stove for 5 minutes before the dish has prepared.Cook at a high temperature for initial heating, then decrease it.

The dish will reach readiness and without the use of additional energy costs.

It is desirable to bring water into gas boiling, because the kettle that works from the network much consumes.In addition, when working is included in very great power.

We wash, Iron and save

When choosing the wash mode, remember that most powder contain special components on their basis and deletes underwear well at low temperatures.

Therefore, it is not necessary to set the maximum.The same rule applies to large revolutions.In addition, don't launch half a laundry for laundry.It is better to save a bedding until it is completely loaded.

The remaining heat can be used when ironing.To do this, 10 minutes before the end of this procedure, turn off iron.The device will be hot all this time.

Lay the foil for food on the ironing board.It will not consume electricity on heating the surface.

Other effective methods

The following recommendations will help minimize costs:

  1. When decorating the rooms (selecting furniture, background, floors, painting ceiling and walls), give the preference for light tones.After all, the color is a brighter color, the more light reflected.In addition, to get a normal lighting level, much less electricity will be required.
  2. The following recommendation will be banal, but with your help, you can greatly reduce receipts costs.To save electricity, you need to wash windows more often (depending on the degree of their pollution).The fact is that pollutants is always passing almost half the sun and natural light.As a result, it is necessary to configure Dimmer at high power.The bulbs must be deleted from the dust at least 2 times a month.In this case, everything will depend on the degree of pollution.
  3. Saving electricity Air conditioning
  4. If you will buy the housing, think that the south side is the brightest.This means that additional lighting will not be required during the day.
  5. Before you turn on divided systems or air conditioners, you need to make sure that there is no draft at home.Otherwise, such a technique will warm the streets, not the rooms.Select air conditioners based on the room size.This will pay the light less less.To turn on the heater as little as possible, you can put windows from the plastic.Despite the fact that this pleasure is not cheap, over the years will be completely paid off.

The ended TV or computer monitor changes best for newer (LED, etc.).There is a great level of energy consumption in the technique of Old -Style.

Modern technique consumes very little electricity.Also do not turn on the scanner, the printer is unnecessary.